DIY Dip-Dye Napkin Rings

These adorable napkin rings are sure to "wow" your guests. This DIY is easier than ever, and the rope material gives a rich, rustic touch to your decor.

What you need

+

What you need

  • Cotton rope (both thin and thick sizes)
  • Scissors
  • Super Glue
  • Fabric Dye

Let's Get Started

Step 1

Cut a 4' piece of thin cotton rope and a 2.5' piece of the thick cotton rope. Place the thin rope on the inside of the thick rope and use a clip at the top to secure the two together. Lay the rope on a flat surface to begin braiding.

Step 2

Take a strand of the thicker rope, lace it over then under the other strands and pull through. Continue doing this until the rope runs out, alternating between the two sides. Once you have run out of rope, unclip the rope at the top .

Step 3

Pull the loose strands at the bottom through the center loop at the top and tie together.

Step 4

Cut off any excess rope that you may have and add a little super glue to hold it together.

Step 5

Mix your dye in a bowl and dip your napkin ring. If you want a more intense color, leave the rope in the dye for a longer time.

Step 6

Let the dye dry before you insert your napkins.

You Might Also Like